Hotline (028) 22 537 797
Support parameter self-adaptive function, generate optimal parameters according to motor type, ensure motor run at optimal performance;
Phase memory function;
Automatic half-current function, selected by DIP switches;
Test running function, selected by DIP switches;
Over voltage protection, over current protection functions;
Micro-step filter function can smooth input pulse to reduce transient motion of motor, make sure motor run more smoothly;
Opto-isolation ERR signal output with max. current of 100mA;
Opto-isolation 5-24V pulse input, responding frequency up 200KHz;
15 subdivision levels and 8 current levels are selectable by DIP switches;
Pulse type is selectable by DIP switches: PLS+DIR&CW/CCW.
| Tên sản phẩm | Mô tả | |
|---|---|---|
| CM880A | Input voltage is DC24~70V, with IO configuration function, can use the PC to debugging |
0 |
| 3CM880 | Input voltage is DC24V~DC70V, match the motor of 57/85 flange |
0 |
| 2CM880 | Input voltage is DC24V~DC70V , match the motor of 57/86 flange |
0 |
| 2CM860 | Input voltage is DC24V~DC70V, match the 2 phase motor of 57 flange |
0 |
| 2CM560 | Input voltage is DC24V~DC50V, match the 2 phase motor of 57 flange |
0 |
| 2CM545 | Input voltage is DC24V~DC50V, match the 2 phase motor of 57 flange |
0 |
| 2CM525 | Input voltage is DC24V~DC50V, match the 2 phase motor of 42/57 flange |
0 |
| 2CM0870 | Input voltage is AC18V~AC80V, match the motor of 57/86 flange,applicable to high-speed and high-torque occasions |
0 |
| CM880B | Input voltage is DC24~70V, with IO configuration function ,tne communication protocol is RS232 and RS485, can use the PC to debugging |
0 |
| CM880C | Input voltage is DC24~70V, with IO configuration function ,tne communication protocol is RS232 and CANopen, can use the PC to debugging |
0 |
| CM422B | Input voltage is DC12~40V, with IO configuration function ,tne communication protocol is RS485, can use the PC to debugging |
0 |
| CM422C | Input voltage is DC12~40V, with IO configuration function ,tne communication protocol is CANopen, can use the PC to debugging |
0 |
.png)
